Email us: info@randomproductsinc.com      Call Us: 216-986-1766

CERAMIC

Multiple layers of heavy duty ceramic grain that are designed for super fast stock removal and extremely long disc life. Our ceramic flap discs are not designed to be used for quick intervals; these super tough industrial grade discs must be used for extended periods of time in order for the discs to heat up and reach their full potential. Watch the sparks fly!

4 1/2" x 7/8"

Part # Type 27 Part # Type 29 Grit
96501 96511 36
96502 96512 40
96504 96514 60
96505 96515 80

4 1/2" x 5/8"-11

Part # Type 27 Part # Type 29 Grit
96501H 96511H 36
96502H 96512H 40
96504H 96514H 60
96505H 96515H 80

CERAMIC FOR ALUMINUM

Special treated ceramic material designed for grinding/sanding such materials as aluminum, where loading is a problerm.

Can also be used on other non-ferrous materials like copper, nickel, titanium and brass.

4 1/2" x 7/8"

Part # Grit
96451 36
96452 40
96454 60
96455 80

4 1/2" x 5/8"-11

Part # Grit
96451H 36
96452H 40
96454H 60
96455H 80

ZIRCONIA FLAP DISCS

Multiple layers of Zirconia cloth flaps constantly expose new sharp points to the work surface. These flaps are laminated by state-ofthe-art automated equipment to a reinforced fiberglass backing that wears with the flaps and will not damage the workpiece. This enables the operator the use of the entire disc for a greater efficiency.

Each disc is balance tested and will not vibrate, providing a smooth cutting, long lasting sanding tool.

Flap discs eliminate the old 2 step process by grinding and blending/finishing at the same time.

HIGH PERFORMANCE BLUE

The ultimate performer! Best cost per grind ratio on the market. 20% more flaps than our original design. For metal, steel and stainless steel.

4 1/2" x 7/8"

Part # Type 27 Flat Grit Part # Type 29 Angle
96100 24 96110
96101 36 96111
96102 40 96112
96104 60 96114
96105 80 96115
96107 120 96117

4 1/2" x 5/8"-11 Hub

Part # Type 27 Flat Grit Part # Type 29 Angle
96100H 24 96110H
96101H 36 96111H
96102H 40 96112H
96104H 60 96114H
96105H 80 96115H
96107H 120 96117H

7" x 7/8"

Part # Type 27 Flat Grit Part # Type 29 Angle
96200 24 96210
96201 36 96211
96202 40 96212
96204 60 96214
96205 80 96215
96207 120 96217

7" x 5/8"-11 Hub

Part # Type 27 Flat Grit Part # Type 29 Angle
96200H 24 96210H
96201H 36 96211H
96202H 40 96212H
96204H 60 96214H
96205H 80 96215H
96207H 120 96217H

5" x 7/8"

Part # Type 27 Flat Grit Part # Type 29 Angle
96152 40 96162
96154 60 96164
96155 80 96165

4 x 5/8"

Part # Type 27 Flat Grit Part # Type 29 Angle
96122 40 96132
96124 60 96134
96125 80 96135

HIGH DENSITY – JUMBO

POLY-COTTON ZIRCONIA

Random Products’ specially designed Poly-Cotton Zirconia High Density Jumbo Flap Discs have 20% more flaps! The Zirconia Cloth Flaps are made with extra tough Polyester/Cotton Cloth Backing that provides faster cutting action and longer disc life than most other brands, especially when using the coarser grits like 36 and 40.

4 1/2" x 7/8"

Part # Type 27 Flat Part # Type 29 Angle Grit
76401 76411 36
76402 76412 40
76404 76414 60
76405 76415 80

4 1/2" x 5/8"-11

Part # Type 27 Flat Part # Type 29 Angle Grit
76401H 76411H 36
76402H 76412H 40
76404H 76414H 60
76405H 76415H 80

HIGH PERFORMANCE PLUS

POLY-COTTON ZIRCONIA

The high performance construction of these Poly-Cotton Zirconia Flap Discs are made with super tough poly-cotton zirconia material that is provides a faster cut and longer disc life.

4 1/2" x 7/8"

Part # Type 27 Flat Part # Type 29 Angle Grit
76100 76110 24
76101 76111 36
76102 76112 40
76104 76114 60
76105 76115 80

4 1/2" x 5/8"-11

Part # Type 27 Flat Part # Type 29 Angle Grit
76100H 76110H 24
76101H 76111H 36
76102H 76112H 40
76104H 76114H 60
76105H 76115H 80
OTHER SIZES AND GRITS AVAILABLE – CALL WITH YOUR REQUIREMENTS

Flap Discs

Multiple layers of abrasive cloth flaps constantly expose new sharp points to the work surface. These flaps are laminated by state-of-the-art automated equipment to a reinforced fiberglass backing that wears with the flaps and will not damage the workpiece. This enables the operator the use of the entire disc for a greater efficiency. Each disc is balance tested and will not vibrate, providing a smooth cutting, long lasting sanding tool.

Flap discs eliminate the old 2 step process by grinding and blending/finishing at the same time.

Our original design for price conscience customers. These high quality zirconia flaps are made with 100% cotton cloth backing and outperform most other brands. Their good cutting action, long disc life and excellent finish provide a GREAT VALUE!

4 1/2" x 7/8"

Part # Type 27 Flat Part # Type 29 Angle Grit
76601 76611 36
76602 76612 40
76604 76614 60
76605 76615 80
76607 76617 120

4 1/2" x 5/8"-11

Part # Type 27 Flat Part # Type 29 Angle Grit
76601H 76611H 36
76602H 76612H 40
76604H 76614H 60
76605H 76615H 80
76607H 76617H 120

6" x 7/8"

Part # Type 27 Flat Part # Type 29 Angle Grit
76701 76711 36
76702 76712 40
76704 76714 60
76705 76715 80
76707 76717 120

6" x 5/8"-11

Part # Type 27 Flat Part # Type 29 Angle Grit
76701H 76711H 36
76702H 76712H 40
76704H 76714H 60
76705H 76715H 80
76707H 76717H 120

7" x 7/8"

Part # Type 27 Flat Part # Type 29 Angle Grit
76801 76811 36
76802 76812 40
76804 76814 60
76805 76815 80
76807 76817 120

7" x 5/8"-11

Part # Type 27 Flat Part # Type 29 Angle Grit
76801H 76811H 36
76802H 76812H 40
76804H 76814H 60
76805H 76815H 80
76807H 76817H 120

OTHER SIZES AND GRITS AVAILABLE – CALL TODAY WITH YOUR REQUIREMENTS

These high quality zirconia flaps are made with 100% cotton backing.

OTHER SIZES AND GRITS AVAILABLE – CALL TODAY WITH YOUR REQUIREMENTS

4 1/2" x 7/8"

Part # Type 27 Flat Part # Type 29 Angle Grit
77101 77111 36
77102 77112 40
77104 77114 60
77105 77115 80

4 1/2" x 5/8"-11

Part # Type 27 Flat Part # Type 29 Angle Grit
77101H 77111H 36
77102H 77112H 40
77104H 77114H 60
77105H 77115H 80

Excellent value! Economical ceramic material for customers that want a step above the zirconia flap disc.

OTHER SIZES AND GRITS AVAILABLE – CALL TODAY WITH YOUR REQUIREMENTS

4 1/2" x 7/8"

Part # Type 27 Flat Part # Type 29 Angle Grit
76671 76681 36
76672 76682 40
76674 76684 60
76675 76685 80
76677 76687 120

4 1/2" x 5/8"-11

Part # Type 27 Flat Part # Type 29 Angle Grit
76671H 76681H 36
76672H 76682H 40
76674H 76684H 60
76675H 76685H 80
76677H 76687H 120

Our lowest cost disc available. Outperforms many other imported discs.

OTHER SIZES AND GRITS AVAILABLE – CALL TODAY WITH YOUR REQUIREMENTS

4 1/2" x 7/8"

Part # Type 27 Flat Part # Type 29 Angle Grit
76901 76911 36
76902 76912 40
76904 76914 60
76905 76915 80
76907 76917 120

4 1/2" x 5/8"-11

Part # Type 27 Flat Part # Type 29 Angle Grit
76901H 76911H 36
76902H 76912H 40
76904H 76914H 60
76905H 76915H 80
76907H 76917H 120

SURFACE CONDITIONING

Non-Woven

Layers of our special reinforced surface conditioning material designed to remove rust, heavy oxidation, blending, finishing and general surface preparation prior to painting or plating – without changing the geometric shape of the workpiece. Excellent finishing tool!

4 1/2" x 7/8"

Part # Type Grade
30271 Type 29/Angle  A Coarse
30272 Type 29/Angle  A Medium
30273 Type 29/Angle  A V. Fine
30274 Type 27/Flat  A Coarse
30275 Type 27/Flat  A Medium
30276 Type 27/Flat  A V. Fine

4 1/2" x 5/8"-11

Part # Type Grade
30271H Type 29/Angle  A Coarse
30272H Type 29/Angle  A Medium
30273H Type 29/Angle  A V. Fine
30274H Type 27/Flat  A Coarse
30275H Type 27/Flat  A Medium
30276H Type 27/Flat  A V. Fine

Interleaf

We use alternating zirconia flaps that provide the EXTRA TOUCH while the non-woven does the finishing for the rougher jobs.

4 1/2" x 7/8"

Part # Grade
30277 Coarse/Z60
30278 Medium/Z80
30279 Fine/Z120

4 1/2" x 5/8"-11

Part # Grade
30277H Coarse/Z60
30278H Medium/Z80
30279H Fine/Z120

MINI QUICK CHANGE

Excellent finishing Tool!

2" Dia. - 50 per box

Part # Grit
96401 36
96402 40
96404 60
96405 80
92661 2" Holder

3" Dia. - 25 per box

Part # Grit
96411 36
96412 40
96414 60
96415 80
92662 3" Holder

TURBO – TRIMMABLE

The special composite (plastic) backing design on our Turbo – Trimmable Flap Discs can actually be trimmed to expose unused flaps for extended disc life. The backing will not mark up the workpiece and the multiple layers of our poly-cotton zirconia flaps provide faster cutting action and long disc life, especially when using 36 and 40 coarse grits.

4 1/2" x 5/8"-11
Internal threaded

Part # Grit
96371T 36
96372T 40
96374T 60
96375T 80

4 1/2" x 7/8"

Part # Grit
96371 36
96372 40
96374 60
96375 80

4 1/2" x 5/8"-11
Metal hub

Part # Grit
96371H 36
96372H 40
96374H 60
96375H 80

POLY-COTTON CERAMIC

4 1/2" x 5/8"-11
Internal threaded

Part # Grit
96391 36
96392 40
96394 60
96395 80
Copyright © Random Products Inc. 2024. All Rights Reserved.