PFX and Advantage

FLEX WHEELS FOR ALUMINUM

Flexible Type 27 grinding wheel designed for work on ALUMINUM. Special waffle or dimple pattern on the surface of the wheel provides extra cutting action without glazing or loading. Flex wheels can grind, blend and finish all with the same wheel. Excellent for aluminum welds, hand rails, shipbuilding and a multitude of other aluminum jobs.

TYPE 27 Flex Wheel - ALU60

Part #	Size	Max RPM	Wheels Per Box
31264H	4 1/2 x 1/8 x 5/8-11	13,300	25
31264	4 1/2 x 1/8 x 7/8	13,300	50

PFX DEPRESSED CENTER GRINDING WHEELS

FERROUS METALS (Type 27)

For weld grinding, deburring, steel, general metalworking jobs.

Part #	Size	Max RPM	Wheels Per Box
80101	9 x 1/4 x 5/8-11	6,600	10
80102	9 x 1/4 x 7/8	6,600	25
80103	7 x 1/4 x 5/8-11	8,500	10
80104	7 x 1/4 x 7/8	8,500	25
80110-H	6 x 1/4 x 5/8-11	10,200	10
80110	6 x 1/4 x 7/8	10,200	25
80105	5 x 1/4 x 5/8-11	12,200	10
80106	5 x 1/4 x 7/8	12,200	25
80107	4 1/2 x 1/4 x 5/8-11	13,300	10
80108	4 1/2 x 1/4 x 7/8	13,300	25
80109	4 x 1/4 x 5/8	15,300	25
80109-38	4 x 1/4 x 3/8	15,300	25
80100-1	3 x 1/4 x 3/8	25,470	25

PIPELINE (Type 27)

For pipeline weld grinding, pipe beveling, cutting and notching.

Part #	Size	Max RPM	Wheels Per Box
80111	9 x 1/8 x 5/8-11	6,600	10
80112	9 x 1/8 x 7/8	6,600	25
80113	7 x 1/8 x 5/8-11	8,500	10
80114	7 x 1/8 x 7/8	8,500	25
80115	6 x 1/8 x 5/8-11	10,200	10
80116	6 x 1/8 x 7/8	10,200	25
80120-H	5 x 1/8 x 5/8-11	12,200	10
80120	5 x 1/8 x 7/8	12,200	25
80117	4 1/2 x 1/8 x 5/8-11	13,300	10
80118	4 1/2 x 1/8 x 7/8	13,300	25
80119	4 x 1/8 x 5/8	15,300	25
80119-38	4 x 1/8 x 3/8	15,300	25

CUTTING WHEELS (Type 27)

For a wide variety of cutting applications.

Part #	Size	Max RPM	Wheels Per Box
80121-H	9 x 3/32 x 5/8-11	6,600	10
80121	9 x 3/32 x 7/8	6,600	25
80177-H	4 1/2 x 3/32 x 5/8-11	13,300	10
80177	4 1/2 x 3/32 x 7/8	13,300	25
80169	4 1/2 x .125 x 7/8	13,300	25
80170	4 1/2 x .125 x 5/8-11	13,300	10

PFX HIGH PERFORMANCE ZIRCONIA DEPRESSED CENTER GRINDING WHEELS

HP PLUS

With a higher concentration of zirconia grain than most traditional wheels, the HP provides a superfast cutting action and extended wheel life well beyond other wheels.

HP ZIRCONIA

Higher concentration of zirconia grain than most traditional wheels. Provides super fast cutting action and extended wheel life way beyond other wheels.

ZIRCONIA

High performance abrasive alloy grain. Fast cutting action. Long wheel life.

PFX DEPRESSED CENTER GRINDING WHEELS

The PFX Depressed Center Grinding Wheels are among the most durable on the market. Random Products carries a broad line used for:

ALUMINUM (TYPE 27):

Special soft bond for fast stock removal without loading.

Part #	Size	Max RPM	Wheels Per Box
80122	9 x 1/4 x 5/8-11	6,600	10
80122-R	9 x 1/4 x 7/8	6,600	25
80123	7 x 1/4 x 5/8-11	8,500	10
80124	7 x 1/4 x 7/8	8,500	25
80127	4 1/2 x 1/4 x 5/8-11	13,300	10
80128	4 1/2 x 1/4 x 7/8	15,300	25
80129	4 x 1/4 x 5/8	15,300	25
80129-38	4 x 1/4 x 3/8	15,300	25

STAINLESS STEEL (TYPE 27):

Designed to work with hard to grind material like stainless steel.

Part #	Size	Max RPM	Wheels Per Box
80133	7 x 1/4 x 5/8-11	8,500	10
80134	7 x 1/4 x 7/8	8,500	25
80137	4 1/2 x 1/4 x 5/8-11	13,300	10
80138	4 1/2 x 1/4 x 7/8	13,300	25

CONCRETE • MASONRY • STONE • CAST IRON:

(Type 27) Extra sharp silicon carbide wheel – Fast cutting, long life.

Part #	Size	Max RPM	Wheels Per Box
80141	9 x 1/4 x 5/8-11	6,600	10
80142	9 x 1/4 x 7/8	6,600	25
80143	7 x 1/4 x 5/8-11	8,500	10
80144	7 x 1/4 x 7/8	8,500	25
80147	4 1/2 x 1/4 x 5/8-11	13,300	10
80148	4 1/2 x 1/4 x 7/8	13,300	25
80149	4 x 1/4 x 5/8	15,300	25

DUCTILE IRON-AC 24 S (TYPE 27)

Part #	Size	Max RPM	Wheels Per Box
80171	9 x 1/4 x 5/8-11	6,600	10
80172	9 x 1/4 x 7/8	6,600	25
80173	7 x 1/4 x 5/8-11	8,500	10
80174	7 x 1/4 x 7/8	8,500	25

SAUCER (TYPE 28):

Special saucer shape wheels designed to grind in a more flat position than Type 27.

Aluminum: Unlike carbon and stainless, aluminum can load during grinding. Frequent applications include trailers, dry boxes, fencing and boat repair.

Stainless Steel: Working on stainless there is more heat generated. Frequent applications include food processing, pressure vessels, hot water tanks and ship & rail containers

Carbon Steel: PFX Depressed Center Grinding Wheels are used for cutting and grinding applications from heavy stock removal to rough blending to prepare the workpiece for the next step in production. Frequent applications include propane tanks, military vehicles, farm equipment and structural steel.

These special thin cutting wheels are perfect for use on angle grinders. The are double reinforced for safety and are made of premium materials, which when combined with German technology ensure the highest quality.

HIGH SPEED CUT-OFF WHEELS

For use with Die Grinders or Power Drills

These Double Reinforced cutting wheels provide fast cutting, long tool life and burr free cuts.

PFX THIN CUTTING WHEELS

Random Products NEW series of “HIGH PERFORMANCE” thin cutting wheels are designed to cut stainless steel, steel, sheet metal, aluminum and many other types of metal.

Using exclusive special formulations of premium raw materials, a unique combination of premium abrasive grains, heat resistant resins and two (2) layers of ultra-thin fiberglass reinforcement, the new PFX Thin Cutting Wheels are becoming the most sought after product of its kind. The special bonding materials allow these wheels to cut faster and last longer than most other high performance wheels on the market.

All wheels are manufactured on our high speed “State of the Art” automatic presses. These presses use the most advanced thin wheel technology and can produce wheels faster rate than any of our competitors and provide:

• Consistent Quality: Every batch of wheels meets stringent QC standards, from wheel to wheel
• Price advantage: Because of the high volumes we produce, we offer a price advantage over the competition
• Operator friendly: Precise, smooth and effortless cutting with a minimum amount of dust or noise.

Ultra Goes far beyond all other thin cutting tools – well beyond due limit, extreme and uncompromising

The ULTIMATE Performer • Exceptional for Stainless Steel & other Tough Metals!!

• Premium abrasive grains including specially treated zirconia grains
• Special Bond with Advanced Resin Formula
• Extended oven curing process to release most harmful fillers that react to high temperatures in excess of 350°F (180°C)
• Contamination Free
  • Contains less than 0.1% iron (Fe), sulfur (S) and chloride (Cl)
  • Will not leave residue or contaminants on workpiece that develop rust spots or other surface imperfections on stainless steel
• Environmentally & Operator Friendly
  • Little waste of cutting material
  • Extremely fast cutting
  • Requires low pressure to cut, reducing operator fatigue and increases tool life
  • Minimal release of smoke or other harmful particles

Stainless Steel & Metal CONTAMINATION FREE!

These fast cutting, long lasting wheels are designed to make smooth and easy cuts in stainless steel, steel, sheet metal, tubes, gratings, steel rope, reinforcements and various other materials.

Aluminum

A one of a kind formulation designed to easily cut aluminum and other non-ferrous metals with a minimum amount of loading or glazing.

Metal

The wheel that set the Standard – the PFX Thin Cutting Wheel for metal! An outstanding thin cutting wheel for all types of metal, sheet metal, gratings, tubes, conduit and more.

For use with Angle Grinders
Special thin cutting wheels for use on angle grinders. Double reinforced for safety, premium materials combined with German technology ensures top quality.

CHOPSAW WHEELS

Most commonly used at construction sites, the PFX Chopsaw Wheel provides cuts that are so clean that they’re almost surgical. The blade cuts like butter on rebar, angle iron, and metal studs and many other materials.

Metal

Excellent general purpose chopsaw. Double reinforced.

Part #	Size	Max RPM	Wheels Per Box
80201	12 x 3/32 x 1	5,100	10
80202	14 x 3/32 x 1	4,400	10
80203	16 x 3/32 x 1	3,800	10

Metal Studs

High performance chopsaw designed to cut light gauge metal studs. Double reinforced.

Part #	Size	Max RPM	Wheels Per Box
80205	14 x 3/32 x 1	4,400	10

Supercut

Super fast cutting action with no burr. Single internal reinforced.

Part #	Size	Max RPM	Wheels Per Box
80206	14 x 3/32 x 1	4,400	10

Stainless

High performance chopsaw to cut stainless steel, steel and other types of metal. Double reinforced.

Part #	Size	Max RPM	Wheels Per Box
80207	14 x 3/32 x 1	4,400	10

STATIONARY CUT-OFF WHEELS

Ferrous Metals and Stainless Steel

Typically used to cut hard materials such as metals, tile, and concrete.

Part #	Size	Max RPM	Wheels Per Box
80208	10 x 3/32 x 5/8	6,100	*25
80209	10 x 3/32 x 1	6,100	*25
80210	10 x 1/8 x 5/8	6,100	*25
80211	10 x 1/8 x 1	6,100	*25
80212	12 x 1/8 x 1	5,100	10
80213	14 x 1/8 x 1	4,400	10
80214	16 x 5/32 x 1	3,800	10
80216	18 x 3/32 x 1	3,400	10
80215	20 x 3/16 x 1	3,000	10

TYPE 11 – CUP WHEELS

Special formulated cup wheels, cone and plugs are available upon request.
We have the capacity to design a cup wheel to fit your application.

10 Wheels Per Box

PLUGS and CONES

For grinding aluminum oxide grain fomulation for snagging and heavy grinding.

FAST CUT DEPRESSED CENTER GRINDING WHEELS

The ADVANATAGE Fast Cut Depressed Center Grinding Wheels are an excellent choice for general purpose applications priced to compete with the low-cost imports.

Fast Cutting Action • Good Wheel Life • Excellent Value

FAST CUT METAL (Type 27)

For weld grinding, deburring, steel, general metalworking jobs.

Part #	Size	Max RPM	Wheels Per Box
31301	9 x 1/4 x 5/8-11	6,600	10
31302	9 x 1/4 x 7/8	6,600	25
31303	7 x 1/4 x 5/8-11	8,500	10
31304	7 x 1/4 x 7/8	8,500	25
31305	5 x 1/4 x 5/8-11	12,200	10
31306	5 x 1/4 x 7/8	12,200	50
31307	4 1/2 x 1/4 x 5/8-11	13,300	10
31308	4 1/2 x 1/4 x 7/8	13,300	50
31309	4 x 1/4 x 5/8	15,300	50
31309-38	4 x 1/4 x 3/8	15,300	50

PIPELINE (Type 27)

For pipeline weld grinding, pipe beveling, cutting and notching.

Part #	Size	Max RPM	Wheels Per Box
31311	9 x 1/8 x 5/8-11	6,600	10
31312	9 x 1/8 x 7/8	6,600	25
31313	7 x 1/8 x 5/8-11	8,500	10
31314	7 x 1/8 x 7/8	8,500	50
31315	5 x 1/8 x 5/8-11	12,200	10
31316	5 x 1/8 x 7/8	12,200	50
31317	4 1/2 x 1/8 x 5/8-11	13,300	10
31318	4 1/2 x 1/8 x 7/8	13,300	50
31319	4 x 1/8 x 5/8	15,300	50
31319-38	4 x 1/8 x 3/8	15,300	50

.045″ CUTTING WHEEL (Type 27)

Special thin Type 27 wheel for Burr Free cutting of metal.

Part #	Size	Max RPM	Wheels Per Box
31376	4 x .045 x 5/8	15,300	25
31378	4 1/2 x .045 x 7/8	13,300	25
31379	5 x .045 x 7/8	12,250	25
31380	6 x .045 x 7/8	10,200	25
31382	7 x 1.6mm x 7/8	8,500	25
31358	4 1/2 x 3/32 x 7/8	13,300	25
31358-H	4 1/2 x 3/32 x 5/8-11	13,300	10

FAST CUT 3-PLY HIGH SPEED CUT-OFF WHEELS

For use with portable gas powered saws, all Advantage Fast Cut High Speed Cut-Off Wheels provide fast cutting action with long life. Made from premium abrasive grains and reinforced with three (3) full layers of fiberglass they run with a safe and smooth cutting action. Advantage Fast Cut High Speed Cut-Off Wheels are German engineered for top performance and consistent quality.

Metal

Aluminum Oxide for Steel, Angle Iron, Rebar

Part #	Size	Max RPM	Wheels Per Box
31181	12 x 1/8 x 1	6,400	10
31182	12 x 1/8 x 20mm	6,400	10
31183	14 x 1/8 x 1	5,460	10
31184	14 x 1/8 x 20mm	5,460	10
31193	16 x 1/8 x 1	4,700	10
31194	16 x 1/8 x 20mm	4,700	10

CONCRETE – MASONRY – STONE

Extra sharp silicon carbide for a fast smooth cut

Part #	Size	Max RPM	Wheels Per Box
31185	12 x 1/8 x 1	6,400	10
31186	12 x 1/8 x 20mm	6,400	10
31187	14 x 1/8 x 1	5,460	10
31188	14 x 1/8 x 20mm	5,460	10
31195	16 x 1/8 x 1	4,700	10
31196	16 x 1/8 x 20mm	4,700	10
31199	Reducer bushings - from 1" to 20mm

DUCTILE IRON

A special blend of aluminum oxide and silicon carbide

Part #	Size	Max RPM	Wheels Per Box
31189	12 x 1/8 x 1	6,400	10
31190	12 x 1/8 x 20mm	6,400	10
31191	14 x 1/8 x 1	5,460	10
31192	14 x 1/8 x 20mm	5,460	10
31197	16 x 1/8 x 1	4,700	10
31198	16 x 1/8 x 20mm	4,700	10

CHOPSAW WHEELS

METAL - Double External Reinforced

Part #	Size	Max RPM	Wheels Per Box
31170	12 x 3/32 x 1	5,100	10
31171	14 x 3/32 x 1	4,400	10

METAL - Single Internal Reinforced

Part #	Size	Max RPM	Wheels Per Box
31175	12 x 7/64 x 1	5,100	10
31176	14 x 7/64 x 1	4,400	10