PFX and Advantage

PFX and Advantage2018-12-06T08:23:59+00:00

FLEX WHEELS FOR ALUMINUM

Flexible Type 27 grinding wheel designed for work on ALUMINUM. Special waffle or dimple pattern on the surface of the wheel provides extra cutting action without glazing or loading. Flex wheels can grind, blend and finish all with the same wheel. Excellent for aluminum welds, hand rails, shipbuilding and a multitude of other aluminum jobs.

PFX DEPRESSED CENTER GRINDING WHEELS

The highest quality Type 27- PFX Depressed Center Wheels from Random Products are the most durable and reliable on the market. They outperform comparable brands in all applications, including:

  • Grinding welds
  • Working with aluminum
  • Deburring most any material
  • Stainless steel
  • Concrete
  • Stone

Our PFX Depressed Center Wheels produce the best cost per grind ratio on the market by combining the best raw materials with the latest German technology. All wheels listed below are in stock and are available for immediate shipment.

FERROUS METALS (Type 27)

For weld grinding, deburring, steel, general metalworking jobs.

PIPELINE (Type 27)

For pipeline weld grinding, pipe beveling, cutting and notching.

CUTTING WHEELS (Type 27)

For a wide variety of cutting applications.

PFX HIGH PERFORMANCE ZIRCONIA DEPRESSED CENTER GRINDING WHEELS

HP PLUS

With a higher concentration of zirconia grain than most traditional wheels, the HP provides a superfast cutting action and extended wheel life well beyond other wheels.

HP ZIRCONIA

Higher concentration of zirconia grain than most traditional wheels. Provides super fast cutting action and extended wheel life way beyond other wheels.

ZIRCONIA

High performance abrasive alloy grain. Fast cutting action. Long wheel life.

PFX DEPRESSED CENTER GRINDING WHEELS

The PFX Depressed Center Grinding Wheels are among the most durable on the market. Random Products carries a broad line used for:

Aluminum (Type 27):

Special soft bond for fast stock removal without loading.

Stainless Steel (Type 27):

Designed to work with hard to grind material like stainless steel.

Concrete • Masonry • Stone • Cast Iron:

(Type 27) Extra sharp silicon carbide wheel – Fast cutting, long life.

Ductile Iron-Ac 24 S (Type 27)

Saucer (Type 28):

Special saucer shape wheels designed to grind in a more flat position than Type 27.

Typical applications for carbon steel, stainless steel or aluminum PFX Depressed Center Grinding Wheels are for grinding anything from light surface finishing to heavy stock removal.

Aluminum: Unlike carbon and stainless, aluminum can load during grinding. Frequent applications include trailers, dry boxes, fencing and boat repair.

Stainless Steel: Working on stainless there is more heat generated. Frequent applications include food processing, pressure vessels, hot water tanks and ship & rail containers

Carbon Steel: PFX Depressed Center Grinding Wheels are used for cutting and grinding applications from heavy stock removal to rough blending to prepare the workpiece for the next step in production. Frequent applications include propane tanks, military vehicles, farm equipment and structural steel.

These special thin cutting wheels are perfect for use on angle grinders. The are double reinforced for safety and are made of premium materials, which when combined with German technology ensure the highest quality.

HIGH SPEED CUT-OFF WHEELS

For use with Die Grinders or Power Drills

These Double Reinforced cutting wheels provide fast cutting, long tool life and burr free cuts.

Click here for product detail

PFX THIN CUTTING WHEELS

Random Products NEW series of “HIGH PERFORMANCE” thin cutting wheels are designed to cut stainless steel, steel, sheet metal, aluminum and many other types of metal.

Using exclusive special formulations of premium raw materials, a unique combination of premium abrasive grains, heat resistant resins and two (2) layers of ultra-thin fiberglass reinforcement, the new PFX Thin Cutting Wheels are becoming the most sought after product of its kind. The special bonding materials allow these wheels to cut faster and last longer than most other high performance wheels on the market.
All wheels are manufactured on our high speed “State of the Art” automatic presses. These presses use the most advanced thin wheel technology and can produce wheels faster rate than any of our competitors and provide:

  • Consistent Quality: Every batch of wheels meets stringent QC standards, from wheel to wheel
  • Price advantage: Because of the high volumes we produce, we offer a price advantage over the competition
  • Operator friendly: Precise, smooth and effortless cutting with a minimum amount of dust or noise.

Ultra Goes far beyond all other thin cutting tools – well beyond due limit, extreme and uncompromising


The ULTIMATE Performer • Exceptional for Stainless Steel & other Tough Metals!!

  • Premium abrasive grains including specially treated zirconia grains
  • Special Bond with Advanced Resin Formula
  • Extended oven curing process to release most harmful fillers that react to high temperatures in excess of 350°F (180°C)
  • Contamination Free
    • Contains less than 0.1% iron (Fe), sulfur (S) and chloride (Cl)
    • Will not leave residue or contaminants on workpiece that develop rust spots or other surface imperfections on stainless steel
  • Environmentally & Operator Friendly
    • Little waste of cutting material
    • Extremely fast cutting
    • Requires low pressure to cut, reducing operator fatigue and increases tool life
    • Minimal release of smoke or other harmful particles

Stainless Steel & Metal CONTAMINATION FREE!

These fast cutting, long lasting wheels are designed to make smooth and easy cuts in stainless steel, steel, sheet metal, tubes, gratings, steel rope, reinforcements and various other materials.

Aluminum


A one of a kind formulation designed to easily cut aluminum and other non-ferrous metals with a minimum amount of loading or glazing.

Metal


The wheel that set the Standard – the PFX Thin Cutting Wheel for metal! An outstanding thin cutting wheel for all types of metal, sheet metal, gratings, tubes, conduit and more.

For use with Angle Grinders
Special thin cutting wheels for use on angle grinders. Double reinforced for safety, premium materials combined with German technology ensures top quality.

Click here for product detail

CHOPSAW WHEELS

Most commonly used at construction sites, the PFX Chopsaw Wheel provides cuts that are so clean that they’re almost surgical. The blade cuts like butter on rebar, angle iron, and metal studs and many other materials.

STATIONARY CUT-OFF WHEELS

Ferrous Metals and Stainless Steel

Typically used to cut hard materials such as metals, tile, and concrete.

TYPE 11 – CUP WHEELS

All 6” cup wheels come with metal safety back and are available for:

  • Zirconia – Z16: Extra sharp Zirconia grain for superfast cut/long life
  • Ductile Iron: CA16 Combo aluminum oxide/silicon
  • Carbide Grains
  • Metal: A16
  • Concrete: C16

PLUGS and CONES

Type 16, 17, 18 and 18R
Please specify type when ordering.
Typically used for heavy metal removal in various casting industries.

Click here for product detail

FAST CUT DEPRESSED CENTER GRINDING WHEELS

The ADVANATAGE Fast Cut Depressed Center Grinding Wheels are an excellent choice for general purpose applications priced to compete with the low-cost imports.

Fast Cutting Action • Good Wheel Life • Excellent Value

FAST CUT METAL (Type 27)

For weld grinding, deburring, steel, general metalworking jobs.

PIPELINE (Type 27)

For pipeline weld grinding, pipe beveling, cutting and notching.

.045″ CUTTING WHEEL (Type 27)

Special thin Type 27 wheel for Burr Free cutting of metal.

FAST CUT 3-PLY
HIGH SPEED CUT-OFF WHEELS

For use with portable gas powered saws, all Advantage Fast Cut High Speed Cut-Off Wheels provide fast cutting action with long life. Made from premium abrasive grains and reinforced with three (3) full layers of fiberglass they run with a safe and smooth cutting action. Advantage Fast Cut High Speed Cut-Off Wheels are German engineered for top performance and consistent quality.

METAL

Aluminum Oxide for Steel, Angle Iron, Rebar

CONCRETE – MASONRY – STONE

Extra sharp silicon carbide for a fast smooth cut

DUCTILE IRON

A special blend of aluminum oxide and silicon carbide

CHOPSAW WHEELS

10 WHEELS PER BOX

FAST CUT
METAL CUT-OFF WHEELS

TYPE 1 THIN WHEELS

For use with Angle Grinders

HIGH SPEED CUT-OFF WHEELS

For use with high speed Die Grinders and Machine Shop Cutting, these High Speed Cut-Off Wheels are fully reinforced with 2 outside layers of fiberglass.

CUT-OFF WHEELS FOR POWER HAND SAWS

25 WHEELS PER BOX

METAL

Click here for product detail